CURRENT AND FORMER POSITIONS
I am Professor of the Principles of Chemical Engineering in the Department of Civil, Chemical and Environmental Engineering, (DICCA) of the Engineering School of the University of Genoa.
I currently teach Principles of Chemical Engineering I and II and I also teach Environmental Transport Phenomena in the Doctoral Course in Fluidynamics and Environmental Engineering Processes of DICCA.
I was the Scientific Director of the 1998 – 2001 triennial research project of the Italian Space Agency (ASI) on Oxygen Transport at the Silicon-Liquid Interface under vacuum or inert carrier-gas conditions and the subsequent ASI-financed Italian National Research Council (CNR) triennial project for the study of the Thermophysical Properties of High-Temperature Metallic Systems.
I was in charge of the Genoese Operative Unit studying Low-Temperature Fuel Cell System Simulation (Cofin 2001), Innovative Solid Oxide Fuel Cell Simulation (Cofin 2004) and Study and Simulation of Fuel Cells with a Proton-conduction Ceramic Electrolyte (Cofin 2006) financed by the Italian Ministry of Education, Universities and Research.
I was the Third Party in the contract for the study of Intermetallic Materials Processing in Relation to Earth and Space Solidification (IMPRESS, Co-ordinator ESA), partially financed by the E.U, and I was the DICAT Scientific Director of the project Utilisation of hydrogen produced by refinery-waste gasification for energy production by fuel cell systems financed by Isaab Energy (ERG Group).
I am the DICCA Scientific Director of MCFC catalyst and stack component degradation and lifetime: Fuel Gas CONTaminant effects and EXtraction strategies (MCFC-CONTEX, Co-ordinator ENEA), partially financed by the E.U. and of Modelling of membrane systems for carbon dioxide separation from biogas, partially supported by the Italian Ministry of Economic Development.
I am a Research Associate of the CNR Institute for Energy and Interfaces in its research into Surfaces and Interfaces for the Generation of Energy (Director E. Ricci).
I am a member of the Student-Staff Commission of Engineering School, the Research Commission of DICCA, the Evaluation Commission of the Chemical Engineering B. Eng. Course and local co-ordinator of the Erasmus-Socrates Programme of the Chemical Engineering Degree courses, responsible for student exchange with other E.U. universities (Karlsruhe University and Dortmund University, Germany, Valencia Universities, Spain). I am a member of the Teaching College of the Doctoral School of Engineering Science and Technology of the University of Genoa and the Doctoral Course in Fluidynamics and Environmental Engineering Processes of the School.
.
EDUCATION AND ACADEMIC EXPERIENCE
• November 1982: Master’s Degree in Chemical Engineering, (B. Eng. Hons.), from the Faculty of Engineering, University of Genova;
• July 1987: PhD in Chemical Engineering (Universities of Turin, Milan and Genoa);
• March 1990 – October 1992: Researcher , Faculty of Engineering, University of Genoa;
• Since November 1992: Associate Professor of the Principles of Chemical Engineering in the Faculty of Engineering of the University of Genoa.
RECOGNITION:
• PATENTS
Ansaldo Fuel Cells has requested the copyright for the MCFC-D3S (MCFC Dynamic and Steady State Simulation), a calculation code that is the core of the European Patent Application EP1834371B1 “Method and System for Operating Molten Carbonate Fuel Cells” (F. Parodi, B. Bosio, E. Arato).
RESEARCH ACTIVITY
My research activity was initially focused on traditional topics of Chemical Engineering, such as the fluid-dynamics of metallurgic reactors, simulation of traditional facilities, data analysis and parameter estimation. More recently, my study has been concerned with new and technologically relevant subjects:
• simulation of fuel cell systems of different families (PAFC, SOFC, PEMFC, MCFC) for the production of electrical energy;
• energy valorisation of different biomasses;
• carbon dioxide separation and transport;
• study of oxygen transport mechanisms at the liquid-vapour interface of liquid metals of technological interest in a vacuum or controlled atmosphere;
My scientific production is attested by more than 140 papers published in international journals or in the proceedings of conferences in which I participated.
STUDENT RECEIPT
Please contact me to have an appointment:
tel.: 010 353 2926 / 346 7439478
email: Elisabetta.Arato@dicat.unige.it
OFFICE LOCATION
Via Opera Pia 15A, 16145 Genova – left stairs, 2nd floor
PUBLICATIONS AND REFERRED THESES:
2017 |
|
Marchelli, F., Moliner, C., Curti, M., Rovero, G., Baratieri, M., Bosio, B., Arato, E. Characterisation of the Char Obtained from Biomass Gasification in a Spouted Bed Reactor (inproceedings) European Biomass Conference and Exhibition, Page(s): 847-852, 2017. |
|
C. Moliner, J.D. Badia, B. Bosio, E. Arato, A. Lagazzo, M. Capurro, A. Ribes-Greus Chemical Engineering Transactions, 57 , Page(s): 1417-1422 , 2017. |
|
F. Marchelli, D. Bove, C. Moliner, B. Bosio, E. Arato Discrete element method for the prediction of the onset velocity in a spouted bed (article) Powder Technology , 321, Page(s): 119-131, 2017. |
|
C. Moliner, J. D. Badia, B. Bosio, E. Arato, T. Kittikorn, E. Strömberg, R. Teruel-Juanes, M. Ek, S. Karlsson,, A. Ribes-Greus Thermal and thermo-oxidative stability and kinetics of decomposition of PHBV/sisal composites (article) Chemical Engineering Communications , 205, 2, Page(s): 226-237, 2017. |
|
C. Moliner, F. Marchelli, B. Bosio, E. Arato Modelling of Spouted and Spout-Fluid Beds: Key for Their Successful Scale Up (article) Energies, 10, Page(s): 1729, 2017. |
2016 |
|
E. Arato, E. Audasso, L. Barelli, B. Bosio, G. Discepoli Kinetic modelling of molten carbonate fuel cells: Effects of cathode water and electrode materials (article) Journal of Power Sources, 2016. |
|
Bove, D., Moliner, C., Curti, M., Rovero, G., Baratieri, M., Bosio, B., Arato, E., Garbarino, G., Marchelli, F. Experimental studies on the gasification of the residues from prune of apple trees with a spouted bed reactor (inproceedings) European Biomass Conference and Exhibition, Page(s): 858-862, 2016, ISSN: 22825819. |
|
C. Moliner, B. Bosio, E. Arato, A. Ribes. Fuel Processing Technology , 152, Page(s): 421-429 , 2016. |
|
C. Moliner, B. Bosio, E. Arato, A. Ribes. Fuel, 180, Page(s): 71-79 , 2016. |
|
Dario Bove, C Moliner, Marco Baratieri, Barbara Bosio, Elisabetta Arato. Chemical Engineering Transactions , 50, Page(s): 1-6, 2016. |
2015 |
|
C. Moliner, M. Curti, B. Bosio, E. Arato, G. Rovero. Experimental tests with rice straw on a conical square-based spouted bed reactor. (article) Journal of Chemical Reactor Engineering , 13, Page(s): 351-358, 2015. |
|
D. Bove, C. Moliner, M. Curti, B. Bosio, G. Rovero, E. Arato. Chemical Engineering Transactions, 43, Page(s): 1363-1368, 2015. |
2014 |
|
M. Mazzoccoli, B. Bosio, E. Arato, S. Brandani Journal of Supercritical Fluids, 95, Page(s): 474-490, 2014. |
|
C. Moliner, B. Bosio, E. Arato, A. Ribes Comparative study for the energy valorisation of rice straw (article) Chemical Engineering Transactions, 37, Page(s): 241-246, 2014. |
2013 |
|
P. Greppi, B. Bosio, E. Arato Membranes and molten carbonate fuel cells to capture CO2 and increment energy production in natural gas power plants. (article) Industrial & Engineering Chemistry Research, 2013. |
2012 |
|
N. Di Giulio, B. Bosio, V. Cigolotti, S.W. Nam Experimental and theoretical analysis of H2S effects on MCFCs. (article) International Journal of Hydrogen Energy, 37, 24, Page(s): 19329–19336, 2012. |
|
D. Bernocco, B. Bosio, E. Arato Feasibility study of a spouted bed gasification plant. (article) Chemical Engineering Research and Design, In press, 2012. |
|
M. Mazzoccoli, B. Bosio, E. Arato Pressure-density-temperature measurements of binary mixtures rich in CO2 for CCS applications. (article) Journal of Chemical and Engineering Data, 57, Page(s): 2774-2783, 2012. |
|
Greppi P., Arato E. Efficient computation paths for the systematic analysis of sensitivities (article) Computer Physics Communications, submitted, 2012. |
|
Mazzoccoli M., Bosio B., Arato E. Energy Procedia, 23, Page(s): 274-283, 2012. |
|
Greppi P., Arato A. Modelling of metal nano-particle condensation and growth in a reactive atmosphere (article) International Journal of Materials Research, 2012/e-first, 2012. |
|
Arato E., Bernardi M., Giuranno D., Ricci E. Surface oxidability of pure liquid metals and alloys. (article) Applied Surface Science, 258, Page(s): 2686-2690, 2012. |
|
Vari Danilo, Ardu Matteo Simulazione tramite software CFD della vaporizzazione di una fase idrocarburica all’interno di una tubazione contenente gas (mastersthesis) 2012. |
|
Delfino Daniele Studio dei meccanismi di ossidazione di sistemi metallici in fase fusa per l’ottimizzazione di leghe dii saldatura esenti piombo (mastersthesis) 2012. |
|
B. Bosio, E. Arato, P. Greppi Technology and Application of Molten Carbonate Fuel Cells. (article) Fuel Cell Science and Engineering, 1, Page(s): 67-95, 2012. |
|
Dellacasagrande Matteo Studio di fattibilità per la produzione di energia elettrica tramite motore Diesel alimentato a olio di Jatropha e relativa verifica sperimentale. (mastersthesis) 2012. |
|
Rossi Stefano Valutazione dell'impiego di acciai ferritici speciali in sistemi di produzione di energia. (mastersthesis) 2012. |
2011 |
|
Mazzoccoli Michela Carbon Capture, Storage and Transportation (CCS&T) process: general aspects and focus on CO2 pipeline modelling (phdthesis) 2011. |
|
Rossi Emanuela Estrazione e caratterizzazione dell’olio di Jatropha per la produzione di energia in paesi emergenti (mastersthesis) 2011. |
|
Colonia Huertas Jose Luis Trattamento delle acque reflue in America Latina: proposta di un impianto sostenibile per una comunità peruviana (mastersthesis) 2011. |
|
Bove Dario Studio di fattibilità della gassificazione dei fancghi da depurazione acque in un reattore autotermico di derivazione siderurgica (mastersthesis) 2011. |
|
Bernocco D., Greppi P., Arato E. A novel approach to the biomass pyrolysis step and product lumping (inproceedings) Elsevier, (Ed.): Proceedings of the 21st European Symposium on Computer Aided Process Engineering , Page(s): 111-115 , 2011. |
|
Bertone Chiara Development of hydroprocessing catalysts for the single-stage production of middle distillates in a Fischer-Tropsch reactor (mastersthesis) 2011. |
|
De Battè Matteo Modello a parametri concentrati di un processo di gassificazione e fusione per il trattamento dei rifiuti (mastersthesis) 2011. |
|
Scaiola Celeste Studio della fattibilità di impiego di acciai speciali ODS come materiali strutturali nei sistemi per la produzione di energia (mastersthesis) 2011. |
|
Ricci E., Arato E., Giuranno D., Lanata T. Oxygen interactions at the surface of a liquid binary alloy: Indium-Tin as a test case. (article) Advances in Materials Science Research, 2, Page(s): 45-59, 2011, ISBN: 978-1-61728-162-42011. |
2010 |
|
Ferrari Elena Confronto tra sistemi di assorbimento chimico e celle a carbonati fusi per la cattura della anidride carbonica da esausti di impianti di potenza (mastersthesis) 2010. |
|
Bocciardo Davide - Garbarino Gabriella Identificazione di parametri cinetici in celle a combustibile a carbonati fusi (mastersthesis) 2010. |
|
Barbagelata Jessica Simulazione di condotte in sistemi di produzione di idrocarburi (mastersthesis) 2010. |
|
Timossi Elena Applicazione di una unità di separazione con MEA alla cattura della CO2 in esausti da impianti di potenza: preliminare ottimizzazione di progetto e di esercizio tramite simulazione di processo (mastersthesis) 2010. |
|
Rebagliati Fabio Assorbimento ed attenuazione di ultrasuoni da parte di lattici polimerici alla temperatura di transizione vetrosa (mastersthesis) 2010. |
2009 |
|
Pongiglione Giovanni Studio di fattibilità per la produzione di energia elettrica tramite motore diesel alimentato ad olio di palma e relativa verifica sperimentale (mastersthesis) 2009. |
|
Greppi P., Bosio B., Arato E. International Journal of Hydrogen Energy, 34, Page(s): 8664-8669, 2009. |
|
Marra D., Bosio B., Arato E. Fluid-Dynamic Characterisation of MCFC Gas Distributors (article) Chemical Engineering & Processing: Process Intensification, 48, Page(s): 797-807, 2009. |
|
Moricone Erica Simulazione di impianti a celle a combustibile accoppiati a sistemi tradizionali per la segregazione dell’anidride carbonica (mastersthesis) 2009. |
|
Bernardi Michela Studio delle interazioni gas-liquido per l’ottimizzazione del processo di produzione di leghe binarie di interesse tecnologico (mastersthesis) 2009. |
2008 |
|
Patrone Guido Preparation of Novel Bimetallic Palladium Gold Coated Silica Nanoparticles and the Application to Reaction Catalysis (mastersthesis) 2008. |
|
Lanata Tiziana Investigation of surface oxidation phenomena in liquid metals and alloys by dynamic surface tension measurements (phdthesis) 2008. |
|
Buzzi Alessandro Studio per la realizzazione di impainto MCFC da 1 MW alimentato a biomassa (mastersthesis) 2008. |
|
Grosso Irene Studio di integrazione gas-liquido in leghe binarie ad alta temperatura (mastersthesis) 2008. |
|
Ricci E., Giuranno D., Arato E., Costa P. Validation of an effective oxidation pressure model for liquid binary alloys (article) Mater. Sci. Eng. A -Structural materials properties microstructure and processing, 495, Page(s): 27-31, 2008. |
|
Arato E., Ricci E., Costa P. The effective oxygen pressure of liquid binary alloys (article) Surface Science, 602, 1, Page(s): 349-357, 2008. |
|
Ricci E., Lanata T., Giuranno D., Arato E. The effective oxidation pressure of indium-oxygen system (article) Journal of Materials Science, 43, 9, Page(s): 2971-2977, 2008. |
|
Greppi P., Bosio B., Arato E. A steady-State Simulation Tool for MCFC Systems Suitable for On-line Applications (article) International Journal of Hydrogen Energy, 33, 21, Page(s): 6327-6338, 2008. |
|
Ricci E., Giuranno D., Grosso I., Lanata T., Amore S., Novakovic R., Arato E. Surface tension of molten Cu-Sn alloys under different oxygen containing atmosphere (article) J. Of Chemical & Engineering Data, 2008. |
|
Bernardi M., Arato E., Ricci E., Costa P. Surface oxidability of pure liquid metals and alloys (article) Surface Science, 2008. |
|
Ricci E., Arato E., Lanata T., Costa P. Oxygen interactions at the surface of a liquid binary alloy: Indium-Tin as a test case (article) Acta Materialia, 2008. |
|
Arato E., Ricci E., Costa P. On diffusion, oxidation and condensation phenomena at the liquid metal – gas interface (article) Materials Chemistry and Physics, 2008. |
|
Arato E., Ricci E., Costa P. Analysis of oxygen-condensate interactions in metal powder production: sprayed particles in a carrier gas phase (article) Industrial & Engineering Chemistry Research, 2008. |
|
E. Ricci, D. Giuranno, I. Grosso, T. Lanata, S. Amore, R. Novakovic, E. Arato Surface tension of molten CU-SN alloys under “oxygen free” and oxygen containing atmosphere (inproceedings) Pau, 2008. |
|
B. Bosio, E. Arato, P.Costa Metodi di identificazione di correnti limite nelle celle a combustibile a carbonati fusi (inproceedings) Convegno GEIERA2008, Genova, 2008. |
|
P. Greppi, E. Arato Tearing for parallelization and control of sparsity in process flowsheeting (inproceedings) 18th European Symposium on Computer Aided Process Engineering – ESCAPE 2008, Lione, Francia, 2008. |
|
Barbieri Giacomo Progettazione di un impianto di trattamento acque reflue civili tramite reattore biologico verticale (mastersthesis) 2008. |
|
Lusso Roberto Applicazione innovativa di sistemi celle MCFC per la produzione di energia e idrogeno (mastersthesis) 2008. |
2007 |
|
Bernardi Michela Studio delle interazione gas-liquido per l'ottimizzazione del processo di produzione di leghe binarie di interesse tecnologico (article) 2007. |
|
Marra Danilo Fluid-dynamic characterisation of molten carbonate fuel cells in plant optimisation (phdthesis) 2007. |
|
Bogliolo Lorenzo Valorizzazione energetica di biomassa in un impainto a celle a combustibile (mastersthesis) 2007. |
|
Monteverde Michela Analisi delle prestazioni di cella a combustibile convenzionali e innovative (mastersthesis) 2007. |
|
Strazza Carlo Sintesi di gold nanoshell rivestite di idrogel di poli-NIPAM per rilascio si farmaci per via fototermica (mastersthesis) 2007. |
|
P. Greppi, B. Bosio, E. Arato Object-oriented modelling applied to hybrid unit operations (inproceedings) AIDIC, Sauro Pierucci, (Ed.): Chemical Engineering Transactions Vol.11. ICheaP-8, Page(s): 113-118, 2007. |
|
M. Pinna, E. Arato, P. Costa Modelling of the gas-phase mass-transfer resistance at PEMFC electrodes (inproceedings) 8, ICHEAP – (Ed.): Chemical Engineering Transactions, Page(s): 431-436, MILANO: Sauro Pierucci (ITALY), 2007. |
|
B. Bosio, D. Marra, E. Arato Analysis on Temperature Distribution on MCFC Cell Plane (inproceedings) Proc. of Second European Fuel Cell Technology and Applications Conference, Page(s): 123-124, Roma, Italy, 2007. |
|
Binello Gianluca Valorizzazione energetica da fanghi di depurazione delle acque civile e industriali (mastersthesis) 2007. |
2006 |
|
Gregori Simona Analisi del funzionamento di celle a combustibile a carbonati fusi con Reforming esterno ed interno (mastersthesis) 2006. |
|
Mazzoccoli Michela Studio di sistemi di defluorizzazione di acqua potabile in paesi in via di sviluppo (mastersthesis) 2006. |
|
Grosso Irene Studio del Reforming del metanolo in celle a combustibile polimeriche (mastersthesis) 2006. |
|
Buzzi Alessandro Studi di nuove soluzioni tecnologiche per migliorare le prestazioni di celle a carbonati fusi (mastersthesis) 2006. |
|
Bono Tomaso Uso di Celle a Combustibile a Carbonati Fusi per l'abbattimento di anidride carbonica (mastersthesis) 2006. |
|
Nizzari Paolo The Development of Temperature Sensitive Poly - NIPAM Microgel - Gold Nanoshell Particles for Phot - thermally Controlled Release (mastersthesis) 2006. |
|
Tomasi, C., Baratieri M., Bosio, B., Arato, E., Baggio, P. Process analysis of an MCFC power plant fed with a biomass syngas (article) Journal of Power Sources, 157, 2, Page(s): 765-774, 2006. |
|
Arato, E., Pinna M., Costa P. Gas-phase mass-transfer resistance at PEMFC electrodes. Part 2 – Effects of the flow geometry and the related pressure field (article) Journal of Power Sources, 158, Page(s): 206-212, 2006. |
|
Arato E., Costa P. Gas-phase mass-transfer resistance at PEMFC electrodes. Part 1 – Diffusive and forced migration through a porous medium (article) Journal of Power Sources, 158, 1, Page(s): 200-205, 2006. |
|
Giuranno D., Ricci E., Arato E., Costa P. Dynamic surface tension measurements of an aluminium-oxygen system (article) Acta Materialia, 54, 10, Page(s): 2625-2630, 2006. |
|
Arato E., Ricci E., Giuranno E., Costa P. Composition transients and saturation phenomena at a liquid metal-vapour interface – the oxidation of tin and aluminium (article) Journal of Crystal Growth, 293, 1, Page(s): 186-192, 2006. |
|
Arato E., Costa P. Transport mechanisms and voltage losses in PEMFC membranes and at electrodes: a discussion of open-circuit irreversibility (article) Journal of Power Sources, 159, 2, Page(s): 861-868, 2006. |
|
P. Greppi, E. Arato, B. Bosio, P. Costa Process simulation of fuel cell systems: recasting detailed models into system models (inproceedings) The Fuel Cells Science and Technology, Torino, Italy, 2006. |
|
B. Bosio, E. Arato, P. Greppi, P. Costa Process simulation of fuel cell systems: identification problems in detailed models (inproceedings) The Fuel Cells Science and Technology, Torino, Italy, 2006. |
|
Lusso Roberto Applicazione innovativa di sistemi a celle MFCF per la produzione di energia e idrogeno (mastersthesis) 2006. |
|
Finetti Silvia - Satta Verdina Indagine modellistica monodimensionale sull’evoluzione di soluti i un suolo insaturo in seguito ad un evento di “pioggia acida” (mastersthesis) 2006. |
|
F. Parodi, B. Bosio, E. Arato Method and system of operating molten carbonate fuel cell (article) International Patent Application PCT/EP2005/000028, Publication N.WO 2006/072262A1, Page(s): 1-48, 2006. |
2005 |
|
Finetti S. - Satta V. Indagine modellistica monodimensionale sull'evoluzione di soluti in un suolo insaturo in seguito ad un evento di "pioggia acida" (article) 2005. |
|
Poggi Ermanno Fenomeni chimico-fisici che influenzano le prestazioni delle celle MFCF (mastersthesis) 2005. |
|
Tomasi Christian Produzione di energia tramite celle a combustibile a partire da biomassa: studio di fattibilità del processo (mastersthesis) 2005. |
|
Rovera Andrea Lo sfruttamento dei rifiuti solidi urbani dal riciclo alla produzione di energia (mastersthesis) 2005. |
|
Arato E., Ricci E., Fiori L., Costa P. Composition transients and saturation phenomena at a liquid metal-vapour interface: an advanced theoretical approach and an application to the oxidation of tin in a vacuum (article) Journal of Crystal Growth, 282, 3-4, Page(s): 525-536, 2005. |
|
Fiori L., Ricci E., Arato E., Costa P. Dynamic surface tension measurements on a molten metal-oxygen system: the behaviour of the temperature coefficient of the surface tension of molten tin (article) Journal of Materials Science, 40, 9-10, Page(s): 2155-2160, 2005. |
|
Bosio B., Arato E. Molten Carbonate Fuel Cell system simulation tools (article) Advances in Fuel Cells 2005, Page(s): 277-290, 2005. |
|
Ricci E., Arato E., Passerone A., Costa P. Oxygen tensioactivity on liquid metal drop (article) Advances in Colloid and Interface Science, 117, 1-3, Page(s): 15-32, 2005. |
|
Arato E., Ricci E., Costa P. Oxygen transport phenomena at the liquid metal-vapour interface (article) Journal of Materials Science, 40, 9-10, Page(s): 2133-2140, 2005. |
|
Serrafero A., Arato E., Costa P. Transport phenomena and performance limits in polymeric electrolyte membrane fuel cells (article) Journal of Power Sources, 145, 2, Page(s): 470-476, 2005. |
|
B. Bosio, A. Serrafero, E. Arato Methane steam reforming in MCFC power plants fed with biomass-derived fuels (inproceedings) Milano, Sauro Pierucci, AIDIC Servizi S.r.l., (Ed.): Chemical Engineering Transactions, Page(s): 719-724, 2005. |
|
C.Tomasi, B. Bosio, E. Arato, P. Baggio Energetic analysis of an MCFC power plan fed by wood gasification syngas (inproceedings) Ninth Grove Fuel Cell Symposium, London, UK, 2005. |
|
D. Alfonso, B. Bosio, A. Pérez-Navarro, E. Arato, P. Escribà, J. Valls, L. Sánchez Advanced fuel cell applications for Mediterranean biomass resources (inproceedings) World Renewable Energy Congress, Aberdeen, Scotland, UK, 2005. |
2004 |
|
Mercenaro Omar Analisi multicriteria di sistemi per la produzione di energia a partire da biomassa nella realtà peruviana (mastersthesis) 2004. |
|
Lusardi M., Bosio B., Arato E. An example of innovative application in fuel cell system development: CO2 segregation using Molten Carbonate Fuel Cells (article) Journal of Power Sources, 131, 1-2, Page(s): 351-360, 2004. |
|
De Francesco M., Arato E., Costa P. Transport phenomena in membranes for PEM applications: an analytical approach to the calculation of membrane resistance (article) Journal of Power Sources, 132, 1-2, Page(s): 127-134, 2004. |
|
Bosio B., Arato E., Costa P., Barbucci A., Cerisola G., Baggio P., Fiori L., Ragazzi M., Viviani M., Parodi F., Capobianco P., Torazza A., Pelizza M. L., Repetto F. Hydrogen as an energy vector: from production to use in fuel cell systems (inproceedings) Padova, SGE editore, (Ed.): Atti del 59°Congresso ATI ‘Generazione di Energia e Conservazione dell’Ambiente’, Page(s): 661-672, Genova, 2004. |
|
Serrafero A., Arato E., Costa P. Fenomeni di trasporto e limiti diffusivi in celle a combustibile a membrana polimerica (inproceedings) Srl, Editore CUES (Ed.): Atti del Convegno GRICU 2004: ‘Nuove frontiere di applicazione delle metodologie dell’ingegneria chimica’, Page(s): 655-658, Porto d’Ischia – Napoli, 2004. |
|
Serrafero A., Arato E., Costa P. A detailed model for low-temperature fuel cells (inproceedings) Milano, Sauro Pierucci, AIDIC Servizi S.r.l., (Ed.): Atti del H2-AGE: When, Where, Why in Chemical Engineering Transactions, Page(s): 423-428, Pisa, 2004. |
|
Coppola C., Bosio B., Arato E. A clean-up system for syngas fed to MCFC systems (inproceedings) Milano, Sauro Pierucci, AIDIC Servizi S.r.l., (Ed.): Atti di H2-AGE: When, Where, Why in Chemical Engineering Transactions, Page(s): 277-282, Pisa, 2004. |
2003 |
|
Dellepiane Daniela Analisi di processo di impianti elettrogeneratori alimetati con gas derivato da canna da zucchero (mastersthesis) 2003. |
|
Coppola M. Carlotta Impianti elettrogeneratori alimentati con biomassa gassificata: il problema del "clean-up" (mastersthesis) 2003. |
|
Ferraris Gianni Reformer a piastre di nuova concezione: sperimentazione su impianto pilota (mastersthesis) 2003. |
|
Ratto M., Fiori L., Ricci E., Arato E. On the use of available theoretical models for the interpretation of capillary phenomena of molten metals in the presence of oxygen (article) Journal of Crystal Growth, 249, 3-4, Page(s): 445-454, 2003. |
|
Dellepiane D., Bosio B., Arato E. Clean energy from sugarcane waste: feasibility study of an innovative application of bagasse and barbojo (article) Journal of Power Sources, 122, 1, Page(s): 47-56, 2003. |
|
Bosio B., Arato E., Costa P. Concentration polarisation in heterogeneous electrochemical reactions: a constistent kinetic evaluation with application to molten carbonate fuel cells (article) Journal of Power Sources, 115, 2, Page(s): 189-193, 2003. |
|
Fiori L., Ricci E., Arato E. Dynamic surface tension measurements on molten metal-oxygen systems: model validation on molten tin (article) Acta Materialia, 51, 10, Page(s): 2873-2890, 2003. |
|
Barabino L., Dellepiane D., Bosio B., Arato E., Parodi F. Use of biomass in fuel cell power plant (inproceedings) Milano, Sauro Pierucci, AIDIC Servizi S.r.l., (Ed.): Atti di Icheap6 in Chemical Engineering Transactions, Page(s): 527-532, Pisa, 2003. |
|
Giuranno D., Ricci E., Fiori L., Arato E. Evaluation of the oxygen transport at the surface of liquid aluminium by dynamic surface tension measurements (inproceedings) V.Buscaglia, P.Vincenzini (Ed.): Advances in Science end Technology 37 CIMTEC 2002: 3rd Forum on new materials – 2nd International Conference on Mass and Charge Transport in Inorganic Materials, Page(s): 183-190, Techna, 2003. |
|
B. Bosio, E. Arato An example of university role in fuel cell system development (inproceedings) Eighth Grove Fuel Cell Symposium, Page(s): 4.26, London, 2003. |
2002 |
|
Fiori Luca Studio delle interazione di metalli liquidi ad alta temperatura con atmosfere contenenti ossigeno (phdthesis) 2002. |
|
Giuranno Donatella Studio delle proprietà di superficie di sistemi metallici ad alta temperatura in funzione dell'atmosfera di lavoro (phdthesis) 2002. |
|
Serrafero Alberto Studio e simulazione di un reformer a piastre di concezione innovativa (mastersthesis) 2002. |
|
Lusardi Manuela Utilizzo delle celle a combustibile a carbonati fusi per produrre energia elettrica e concentrare l'anidride carbonica (mastersthesis) 2002. |
|
Barabino Laura Produzione di energia elettrica mediante celle a combustibile a carbonati fusi alimentate a biomassa (mastersthesis) 2002. |
|
Dodera Stefano Taratura di un modello di pila a combustibile a carbonati fusi (mastersthesis) 2002. |
|
Dellepiane Daniela Studio di fattibilità per la produzione di energia elettrica in perù utilizzando celle a combustibile alimentate con biogas da canna da zucchero (mastersthesis) 2002. |
|
Bosio B., Costamagna P., Arato E., Costa P. Modelling approach to fuel cell development (article) Recent research developments in electrochemistry, 5, Page(s): 21-45, 2002. |
|
De Francesco M., Arato E. Start up analysis for automotive PEM fuel cell system (article) Journal of Power Sources, 108, 1-2, Page(s): 41-52, 2002. |
|
Parodi F., Bosio B., Arato E., Costa P. Molten carbonate fuel cell contribution to CO2 abatement (inproceedings) Antwerpen, Ed. Technologisch Institut (Ed.): Proc.of Int.Conf.on Future Energy Systems and Technology for CO2 abatement, Page(s): 157-163, Antwerpen, Belgium, 2002. |
|
B. Bosio, E. Arato Le celle a combustibile a carbonati fusi: sviluppo di applicazioni innovative (inproceedings) Elettrochimica per il recupero e l’ambiente ERA02, Page(s): 20, Torino, 2002. |
|
E. Arato, B. Bosio Le celle a combustibile a bassa temperatura: applicazioni per autotrazione e generazione diffusa (inproceedings) Elettrochimica per il recupero e l’ambiente ERA02, Page(s): 15, Torino, 2002. |
2001 |
|
Arato E., Bosio B., Costa P., Parodi F. Preliminary experimental and theoretical analysis of limit performance of molten carbonate fuel cell (article) Journal of Power Sources, 102, 1-2, Page(s): 74-81, 2001. |
|
Ratto M., Ricci E., Arato E., Costa P. Oxidation of metals with highly reactive vapours: extension of Wagner theory (article) Metallurgical transactions, B, 32B, Page(s): 903-911, 2001. |
|
Fiori L., Giuranno D., Ratto M., Ricci E., Arato E. Study of the oxidation conditions for molten tin-oxygen system via dynamic surface tension measurements (inproceedings) Milano, Pierucci Eitore. AIDIC Servizi S.r.l., (Ed.): Atti di The Fifth Italian Conference on chemical and process engineering ICHEAP5, Page(s): 965-970, Firenze, 2001. |
|
Bosio B., Arato E., Parodi F. Integration of a fuel cell model in a global power plant simulation (Fuel cell power plant process analysis using aspen plus) (inproceedings) Milano, Jiri Klemes editore, AIDIC Servizi S.r.l., (Ed.): Atti del 4th Conference on process integration, modelling and optimisation for energy saving and pollution reduction PRES01, Page(s): 55-58, Firenze, 2001. |
|
De Francesco M., Arato E. Control strategies of the air flow rate in a PEM fuel cell hybrid bus (inproceedings) Atti su CD del 3rd International Conference on Control and diagnostics in automotive applications, Page(s): 1-9, Sestri Levante – Genova, 2001. |
|
Arato E. A simulation tool for fuel cell devices (inproceedings) Padova, SGE editore, (Ed.): Atti del X Convegno Tecnologie e sistemi complessi Sergio Stecco, Page(s): 193-198, Genova, 2001. |
|
Ricci E., Novakovic R., Ratto M., Arato E. Surface properties of molten metal oxygen systems theoretical tools (article) Transactions of JWRI, 30, Page(s): 179-188 , 2001. |
2000 |
|
Arato E., Bosio B., Massa R., Parodi F. Optimisation of the cell shape for industrial MCFC stacks (article) Journal of Power Sources, 86, 1-2, Page(s): 302-308, 2000. |
|
Ratto M., Ricci E., Arato E. Mechanism of oxidation/deoxidation of liquid silicon: theoretical analysis and interpretation of experimental surface tension data (article) Journal of Crystal Growth, 217, 3, Page(s): 233-249, 2000. |
|
Ricci E., Ratto M., Arato E., Costa P., Passerone A. A theoretical approach for the interpretation of liquid metal surface tension measurements in the presence of oxygen (article) ISIJ International, 40, Page(s): 139-143, 2000. |
|
Ricci E., Novakovic R., Arato E., Ratto M. Study of dynamic surface tension of molten silicon: development of experiments and models (inproceedings) Jülich, Ed. Hilpert, Froben e Singheiser, (Ed.): Atti del 10 th International IUPAC Conference on High Temperature Materials Chemistry HTMC X, Page(s): 755-758, Jülich, Germania, 2000. |
|
Giuranno D., Ratto M., Ricci E., Arato E. Dynamic surface tension measurements on molten Sn: oxidation-deoxidation transition and model validation (inproceedings) Jülich, Ed. Hilpert, Froben e Singheiser, (Ed.): Atti del 10 th International IUPAC Conference on High Temperature Materials Chemistry HTMC X, Page(s): 759-762, Jülich, Germania, 2000. |
|
Ratto M., Arato E., Ricci E., Novakovic R. Transport of oxygen at the surface of liquid metals: models and experiments (article) Mass and charge transport in inorganic materials. Fundamentals to devices (Part A), 29, Page(s): 347-354, 2000, ISBN: 88-86538-30-8. |
|
Bosio B., Capobianco P., Arato E. Theoretical model and experimental validation of a pressurized molten carbonate fuel cell (article) Mass and charge transport in inorganic materials. Fundamentals to devices (Part B), 29, Page(s): 1277-1284, 2000, ISBN: 88-86538-30-8. |
1999 |
|
Bosio B., Parodi F., Arato E., Costamagna P. Process analysis of a molten carbonate fuel cell pilot plant (inproceedings) 1999), Ed. AIDIC Servizi S.r.l. (Milano, (Ed.): Atti di The Fourth Italian Conference on chemical and process engineering ICHEAP4, Page(s): 651-654, Firenze, 1999. |
|
E. Arato, B. Bosio, R. Massa, F. Parodi From square to rectangular cells in a MCFC scale-up process: experimental and simulation results optimising operating conditions (inproceedings) Sixth Grove Fuel Cell Symposium, Page(s): 46, London, 1999. |
1998 |
|
Ricci E., Nanni L., Arato E., Costa P. Characteristic times of oxygen mass transfer at the liquid metal-vapour interface (article) Journal of Materials Science, 33, 2, Page(s): 305-312, 1998. |
|
Costamagna P., Costa P., Arato E. Some more considerations on the optimisation of cermet solid oxide fuel cell electrodes (article) Electrochimica Acta, 43, 8, Page(s): 967-972, 1998. |
|
Bosio B., Arato E., Costamagna P., Parodi F. Sviluppo di tecnologie di celle a combustibile (inproceedings) Eris, Ed. AIDIC, Milano e ed. (Ed.): Atti del Congresso GRICU 1998 e ICP, Page(s): 119-122 e 252-255, Ferrara, 1998. |
|
Costamagna P., Arato E. Fenomeni di trasporto in celle a combustibile a membrana polimerica (inproceedings) Milano, Ed. AIDIC, (Ed.): Atti del Congresso GRICU 1998, Page(s): 215-218, Ferrara, 1998. |
|
Arato E., Costamagna P., Marcenaro B. Control strategies of a full size hybrid bus with a second generation fuel cells (inproceedings) 1998, Ed. SGE Padova (Ed.): Atti del Second international Conference on Control and diagnostics in automotive applications, Page(s): 135-144, Genova, 1998. |
|
Costamagna P., Arato E., Cerisola G., Panizza M., Barbucci A. Considerations of optimization of cermet solid oxide fuel cell electrodes (inproceedings) 1999, P. Vincenzini Ed., TECHNA S.r.l., Faenza (Ed.): Theoretical and experimental aspects, in Advances in Science and Technology, 24, Topical Symposium VII – Innovative materials in Advanced Energy Technologies – Atti del 9th CIMTEC – World Forum on New, Page(s): 47-54, Firenze, 1998. |
1997 |
|
P. Costamagna, V. Antonucci, P. Costa, E. Arato Cermet cathodes composed of small particles: model and validation (inproceedings) Evoy, ed. J. Mc; 2, K. Nisancioglu, IEA Classification Level (Ed.): Atti di Materials and Processes, 10° SOFC IEA Workshop, Page(s): 196-199, Les Diablerets, Svizzera, 1997. |
|
Nanni L., Ricci E., Arato E., Costa P. Surface tension measurements for the estimation of mass transfer rate in gas-liquid metal systems (inproceedings) AIDIC, (Ed.): Atti del First European Congress on Chemical Engineering ECCE1 (Firenze, 4-7 maggio 1997), Page(s): 1627-1630, Milano, 1997. |
|
Ricci, E., Nanni L., Arato E., Passerone A. Oxygen transport at liquid metals –vapour interface (inproceedings) (NJ), Ed. Spear, Pennsylvania USA, The Electrochemical Society Inc., Pennington (Ed.): High Temperature Materials Chemistry (HTMC IX), Page(s): 413-420, Penn State, Pennsylvania, 1997. |
|
Costamagna P., Arato E. Modelling of the ohmic resistance of tubular solid oxide fuel cells (inproceedings) (NJ), ed. Stimming, Singhal, Tagawa e Lehnert, The Electrochemical Society Inc., Pennington (Ed.): Solid Oxide Fuel Cells V, Page(s): 1339-1348, Aachen – Germania, 1997. |
1996 |
|
P. Costamagna, E. Arato, P.L. Antonucci, V. Antonucci Partial oxidation of CH4 in solid oxide fuel cells: simulation model of the electrochemical reactor and experimental validation (article) Chemical Engineering Science, 51, 11, Page(s): 3013-3018, 1996. |
|
E. Arato, P. Costamagna, V. Antonucci, P.L. Antonucci A comparative analysis of internal fed methane SOFC: partial oxidation versus steam reforming route (inproceedings) Thorstensen, Ed. (Ed.): Atti del 2nd European Solid Oxide Fuel Cell Forum (Oslo, Norvegia, maggio 1996), Page(s): 153-162, Oslo, 1996. |
1995 |
|
Antonucci V., Antonucci P.L., Giordano N., Arato E., Costamagna P., Rocchini G., Demin A. Partial oxidation of CH4 for SOFC: performance analysis, in Solid Oxide Fuel Cells IV/1995 (inproceedings) Tagawa, Ed. M. Dokiya, O. Yamamoto, H.; 95-1, S.C. Singhal, PV (Ed.): The Electrochemical Society Proceedings Series, Page(s): 820-828, Pennington, NJ, 1995. |
1994 |
|
Arato E., Costamagna P., Costa P. Flow distribution in fuel cell stack (article) Chemical and Biochemical Engineering Quarterly, 8, 2, Page(s): 85-94, 1994. |
|
Costamagna P., Arato E., Achenbach E., Reus U. Fluid Dynamic Study of Fuel Cell Devices: Simulation and Experimental Validation (article) Journal of Power Sources, 52, 2, Page(s): 243-249, 1994. |
|
Costamagna, P., Arato E. Parameter Design Optimization of a Planar SOFC (inproceedings) Svizzera, Ed. Bossel, Baden – (Ed.): Atti del First European Solid Oxide Fuel Cell Forum, Page(s): Lucerna – Svizzera, 1994. |
|
Costamagna P., Arato E., Achenbach E., Reus U. Fluid dynamic simulation of a monolithic fuel cell stack (inproceedings) Atti del 6° IEA SOFC Workshop, Page(s): 127-140, Roma, 1994. |
1993 |
|
Paladino O., Arato E. Study of model coexistence using a statistical approach (article) Mathematical & Computer Modelling, 17, 12, Page(s): 73-80, 1993. |
|
Arato E., Costa P. Dynamic simulation of fuel cell devices (article) Chemical and Biochemical Engineering Quarterly, 7, 3, Page(s): 161 – 167, 1993. |
|
Arato E., Costamagna P., Costa P. Effects of flow distribution on the performances of a electrochemical reactor (inproceedings) Atti di First Conference on Chemical and process engineering, Page(s): 363-367, Firenze, 1993. |
|
Arato E., Costamagna P., Costa P. Effects of flow distribution in fuel cell devices (inproceedings) Jülich, Forschungszentrum, (Ed.): Atti del 5° IEA Workshop ‘SOFC Materials, Process Engineering and Electrochemistry’, Page(s): 253-262, Julich, Germania, 1993. |
1992 |
|
Arato E., Costa P. Mathematical modelling of monolithic SOFC, in “Stack design tool” (article) International Energy Agency SOFC Task Report, Page(s): 6-17, 1992. |
|
Paladino O., Arato E., Braggio F., Costa P. Combustion time distribution and dynamic behaviour of a fluidized-bed incinerator (article) Chemical and Biochemical Engineering Quarterly, 6, 4, Page(s): 173-179, 1992. |
|
Arato E., Paladino O., Marcenaro B., Costa P. Effects of flow geometry on the performances of a monolithic electrochemical reactor (inproceedings) NEDO, (Ed.): Atti di ‘The International Fuel Cell Conference’, Page(s): 51-54, Makuhari, Giappone, 1992. |
|
Arato E., Costa P. Mathematical modelling of monolithic SOFC (inproceedings) Berna, International Energy Agengy, (Ed.): 1992. |
|
Barilati G., Arato E. Sistema integrato per la simulazione e il controllo dei rigeneratori cowper (inproceedings) Genova, Editore Pirella, (Ed.): Atti del 36° Convegno ANIPLA, Page(s): 122-135, Genova, 1992. |
|
Arato E., Paladino O., Marcenaro B. Dynamic simulation as a tool for setting up operating procedures in a fuel cell system (inproceedings) Genova, Editore Pirella, (Ed.): Atti del 36° Convegno ANIPLA, Page(s): 369-381, Genova, 1992. |
1991 |
|
Costa P., Arato E., Maga L., Paladino O. Steady state simulation of fuel cell devices (article) Chemical and Biochemical Engineering Quarterly, 5, 1-2, Page(s): 43-51, 1991. |
|
Costa P., Arato E.and Canepa B. Micro and macro – models for the simulation of fuel cell devices (article) Quaderni dell’Ingegnere Chimico Italiano, in La Chimica e l’Industria, 73, 8-9, Page(s): Q46-Q53, 1991. |
|
Arato E., Costa P. An approach to dynamic simulation of SOFCs (inproceedings) Brussels, ECSC, (Ed.): Atti del ‘Second International Symposium on Solid Oxide Fuel Cells’, Page(s): 273-280, Atene, Grecia, 1991. |
1990 |
|
Arato E., Costa P., Canepa B. Numerical modelling in fuel cell simulation (inproceedings) presentato a International Energy Agency SOFC Expert Meeting, Losanna, 1990. |
|
Arato E., Costa P., Canepa B. Numerical modelling in fuel cell simulation (inproceedings) presentato a CISCI ’90, San Benedetto del Tronto, 1990. |
|
Arato, E. Modelling activities in Italy (inproceedings) Berna, ©Office Federal de l’Energie (Ed.): Atti del ‘Workshop on modelling and evaluation of advanced SOFC’, Page(s): 97-105, Hertenstein -Svizzera, 1990. |
|
Costa P., Arato E. Some further considerations on mass and charge transfer in fuel cell electrodes (article) Chemical and Biochemical Engineering Quarterly, 4, 1, Page(s): 9-14, 1990. |
1989 |
|
Costa P., Arato E., Canepa B. Mass, Heat and Charge Transfer in Fuel Cell Electrodes (article) Chemical and Biochemical Engineering Quarterly, 3, 3, Page(s): 111-116, 1989. |
|
Arato E., De Marchi G., Costa P., Canepa B. Mixing and phase interactions in jet stirred multiphase reactors (article) Chemical and Biochemical Engineering Quarterly, 3, 4, Page(s): 145-152, 1989. |
1988 |
|
Dovì V., Arato E., Paladino O., Canepa B. Model discrimination in vapour – liquid equilibria (inproceedings) Industry, Chemical; China, Engineering Society of (Ed.): Atti del ‘Int. Symp. on Thermodynamics in Chem. Eng. & Ind.’, Page(s): 194-208, Beijing, 1988. |
|
Gaggero M., Arato E., Costa P., Lodi G. Liquid – liquid mixing: studies on the phase formation in stirred tanks (inproceedings) Atti del ’6th European Conference on mixing’,(Pavia, maggio 1988), Page(s): 197-204, BHRA, Cranfield, England, 1988. |
|
Gaggero M., Arato E., Costa P., Lodi G. Liquid – liquid mixing: studies on the phase formation in stirred tanks (inproceedings) Atti del ’6th European Conference on mixing’,(Pavia, maggio 1988), Page(s): 197-204, BHRA, Cranfield, England, 1988. |
|
Gaggero M., Arato E., Costa P., Lodi G. Liquid – liquid mixing: studies on the phase formation in stirred tanks (inproceedings) Atti del ’6th European Conference on mixing’,(Pavia, maggio 1988), Page(s): 197-204, BHRA, Cranfield, England, 1988. |
|
De Marchi G., Canepa B., Arato E., Randi G. Evaluation of the mixing efficiency of the subsurface aeration systems for the treatment of industrial wastewaters (inproceedings) Oxford, Ed. Panswad, Polprasert e Yamamoto, Pergamon Press (Ed.): Atti del ‘Second IAWPRC Asian Conference on Water Pollution Control in Asia’, Page(s): 471-478, Bangkok, 1988. |
|
Arato E., Costa P., De Marchi G., Gaggero M., Lodi G. Emulsification in multiphase systems by a gas jet impingement (inproceedings) Atti del ’6th European Conference on mixing’, (Pavia, maggio 1988), Page(s): 243-249, BHRA, Cranfield, England, 1988. |
|
De Marchi G., Costa P.and Lodi G., Arato E., Randi G., Canepa B. A generalized semi-empirical method for the calculation of the activities of the metallurgical slags (inproceedings) Industry, Chemical; China, Engineering Society of (Ed.): Atti del ‘Int. Symp. on Thermodynamics in Chem. Eng. & Ind.’, Page(s): 553-560, Beijing, 1988. |
|
De Marchi G., Arato E., Canepa B., Lodi G., Randi G., Farné G. A generalized model for the simulation of the secondary steelmaking processes (inproceedings) ‘Chemeca 1988', Sydney, 1988. |
|
Dovì V., Arato E., Maga L., Cavalieri D’Oro P., Bagatin R. Determination of unresolved peaks via a new non linear regression procedure (article) Annali di Chimica, 78, 9-10, Page(s): 529-542, 1988. |
1987 |
|
Dovì V., Arato E., Maga L. A more general formulation of separable least squares (article) Mathematical Modelling, 8, Page(s): 20-23, 1987. |
|
Costa P., Lodi G., Arato E., Maga L., Arazzini S., Borsani R. Using a homogeneous model in simulation of sea water desalination condenser (article) Desalination, 65, Page(s): 123-138, 1987. |
1986 |
|
Arato Elisabetta Fluidodinamica di sistemi polifasici in processi soffiati di ossigeno (phdthesis) 1986. |
|
Dovì V., Arato E., Paladino O., Isimbaldi A., Canepa B. Reduction of the number of independent parameters in chemical kinetics regression analysis (inproceedings) Atti del ‘World Congress 3rd of Chemical Engineering’, Page(s): 4-7, Tokyo, 1986. |
|
Dovì V., Paladino O., Arato E., Isimbaldi A., Canepa B. Reducing overestimation in chemical kinetics regression analysis (inproceedings) Atti del ‘World Congress 3rd of Chemical Engineering’, Page(s): 8-11, Tokyo, 1986. |
|
Arato E., De Marchi G., Costa P., Canepa B. Conditions of emulsification in gas – liquid – liquid systems (inproceedings) Atti del ‘World Congress 3rd of Chemical Engineering’, Page(s): 413-416, Tokyo, 1986. |
|
Dovì V., Paladino O., Arato E., Maga L., Passerone A. An improved regression analysis for automatic surface tension measurements (article) Mathematics and Computers in simulation, 28, 4, Page(s): 331-335, 1986. |
1985 |
|
Dovì V., Arato E. Reduction of correlation factors in the estimates of catalytic kinetics parameters (inproceedings) Italiana, Società Chimica (Ed.): Atti del ’5° Congresso nazionale di catalisi e seminario su tematiche di catalisi’, Page(s): 117-120, Padova, 1985. |
|
Gaggero M., Arato E., Giama M., Canepa B., Costa P., Lodi G. Liquid – liquid mixing: investigations on the complete dispersion (inproceedings) Atti del ’5th European Conference on Mixing’, (Würzburg, giugno 1985), Page(s): 191-197, BHRA, Cranfield, England, 1985. |
|
Canepa B., Costa P., Arato E., De Marchi G. Fluodinamica di sistemi polifasici in processi soffiati di conversione con ossigeno (inproceedings) Atti del ‘Convegno Conclusivo del Progetto Finalizzato Metallurgia del C.N.R.’, Page(s): 1112 -1124, Terni, 1985. |
|
Arato E., Gaggero M., Giama M., Lodi G., Costa P., Canepa B. Emulsification of two immiscible liquids under the action of a gas jet (inproceedings) Atti del ’5th European Conference on Mixing’ (Würzburg, giugno 1985), Page(s): 519-526, BHRA, Cranfield, England, 1985. |
1984 |
|
De Marchi G., Arato E., Costa P., Canepa B. Critical conditions of emulsification of two immiscible liquids under the action of a gas jet (inproceedings) Atti del ’4th Italian – Yugoslavian – Austrian Chemical Engineering Conference’, Page(s): 214-221, Grado, 1984. |
|
De Marchi G., Arato E., Costa P., Canepa B. Critical conditions of emulsification of two immiscible liquids under the action of a gas jet (inproceedings) Atti del ’4th Italian – Yugoslavian – Austrian Chemical Engineering Conference’, Page(s): 214-221, Grado, 1984. |
1983 |
|
Arato E., Blondeaux P., De Bernardinis B., Seminara G., Stagi L. Sul meccanismo del ricambio lagunare: modello teorico e primi rilievi sperimentali (inproceedings) Atti del Convegno di Studi ‘Laguna, fiumi, lidi; cinque secoli di gestione delle acque nelle Venezie’, Page(s): 253-270, Venezia, 1983. |
|
Canepa B., Costa P., Arato E., De Marchi G Simulazione di convertitori soffiati con ossigeno: aspetti fluodinamici dell’impatto di un getto gassoso su sistemi liquidi (inproceedings) memoria presentata al Convegno “Primi contributi alla soluzione di problemi della metallurgia italiana", Roma, 1983. |
0000 |
|
Arni S., Bosio B., Arato E. Syngas from sugarcane pyrolysis: an experimental study for fuel cell application (article) Renewable Energy, 0000. |
|
Arato E., Pinna M., Costa P. Gas Phase mass transfer resistances to PEMFC electrodes. Part 3 – The rigorous calculation of the Sherwood numbers (article) International Journal of Hydrogen Energy, 0000. |